L. Costa

55605778999

Publications - 5

On the temperature rate dependent transformation processes

L. Costa I. Czinege I. Felde T. Reti R. Colas

Publication Name: Materials Science Forum

Publication Date: 2007-01-01

Volume: 537-538

Issue: Unknown

Page Range: 571-578

Description:

Kinetic models of new types are suggested which are designated primarily to predict the progress of non-isothermal transformations occurring during rapid heating and cooling in alloys. A common feature of each model outlined is that it takes into account not only the varying temperature but also the rate of temperature change on the transformation rate of the process. The two models represented by differential equations are generated by using the concept of virtual kinetic parameters, which can be determined from non-isothermal experiments only. A key property of the virtual parameter "p" involved in the transformation rate equations is that it quantitatively characterizes the temperature rate dependence of the non-isothermal reaction.

Open Access: Yes

DOI: 10.4028/0-87849-426-x.571

Laser powder deposition of tool steels: Strategies leading to homogeneous parts

L. Costa T. Reti R. Vilar

Publication Name: Materials Science Forum

Publication Date: 2006-01-01

Volume: 514-516

Issue: PART 1

Page Range: 739-743

Description:

The microstructure and properties of tool steel parts built by laser powder deposition (LPD) depend considerably on the build-up strategy and on the processing parameters used. This dependence can lead to inconsistent results which may limit the widespread acceptance of LPD. There is, thus, a need for efficient process optimisation tools that take into consideration the complex phase transformations that may occur during the part build-up process and their effect on final properties. A model coupling finite element heat transfer calculations with transformation kinetic theory has been developed, which allows the microstructure and property distributions in parts produced by LPD to be predicted. Application of this model to the deposition of tool steels not only explains the origin of the heterogeneous distribution of properties usually mentioned in the literature but also allows designing build-up strategies that consistently lead to homogeneous, high quality parts. Its application to the study of the influence of substrate pre-heating and idle time between the deposition of consecutive layers is illustrated in the present paper.

Open Access: Yes

DOI: 10.4028/www.scientific.net/msf.514-516.739

Simulation of phase transformations in steel parts produced by laser powder deposition

L. Costa A. M. Deus I. Felde R. Colaço T. Reti R. Vilar

Publication Name: Materials Science Forum

Publication Date: 2005-01-01

Volume: 473-474

Issue: Unknown

Page Range: 315-320

Description:

Multilayer laser powder deposition is being used for the rapid manufacturing of fully dense near net shape components in a wide variety of materials. In this process parts are built by overlapping consecutive layers of a laser melted material. As a result of this overlapping, the material in each layer will undergo successive thermal cycles as new layers are deposited. Despite their short duration, these thermal cycles can activate solid-state transformations that lead to progressive modification of the microstructure and properties of the material. Since the thermal history of the material in the deposited part will differ from point to point, the part will present a complex and heterogeneous microstructure, and properties that differ from point to point. Given that the microstructure and property distribution in steel parts produced by laser powder deposition can only be predicted by modelling, a three-dimensional thermo-kinetic finite element model of laser powder deposition of tool steels was developed, In the present work this model was applied to the study of the influence of substrate size on the microstructure and properties of a six-layer wall of AISI 420 tool steel. The results show that the temperature field depends significantly on the size of the substrate, leading to distinct microstructures and properties in the final part. © 2005 Trans Tech Publications, Switzerland.

Open Access: Yes

DOI: 10.4028/0-87849-957-1.315

Tempering effects in steel parts produced by additive fabrication using laser powder deposition

L. Costa A. M. Deus R. Colaço T. Reti R. Vilar

Publication Name: Virtual Modelling and Rapid Manufacturing Advanced Research in Virtual and Rapid Prototyping

Publication Date: 2003-12-01

Volume: Unknown

Issue: Unknown

Page Range: Unknown

Description:

Laser processed tool steels present a metastable structure generally containing martensite and an extremely large proportion of retained austenite as compared to conventionally treated steel, which affects considerably the properties of the material. In rapid tooling by laser powder deposition, as consecutive layers of material are deposited to generate a 3D object, the material in previously deposited layers is submitted to successive thermal cycles, which destabilise retained austenite, leading to its transformation to martensite. Also, the martensite present in these layers will progressively decompose by tempering when the material is reheated. As a result, the properties of the material are progressively modified as the object is built-up. The evolution of the microstructure and properties of tool steels during laser freeform manufacturing is extremely difficult to study experimentally, due to the complexity of the transformations involved and the heterogeneity of the material and of the applied thermal field, hence modelling presents clear advantages in the optimization of part build-up strategy. In the present work, a model of the phase transformations resulting from the successive overlap of clad layers based on the coupling of finite element calculations of the time-dependent temperature distribution with transformation kinetics is described. The model was used to predict the evolution of properties and final property distribution in a martensitic stainless steel component produced by laser powder deposition.

Open Access: Yes

DOI: DOI not available

A simple technique to estimate the processing window for laser clad coatings

K. Zoltan L. Costa B. Verö I. Felde R. Colaço T. Reti R. Vilar

Publication Name: International Surface Engineering Congress Proceedings of the 1st Congress

Publication Date: 2003-12-01

Volume: Unknown

Issue: Unknown

Page Range: 237-242

Description:

A semi-empirical method for selecting the processing parameters of laser cladding is proposed. This phenomenological approach uses simple mathematical formulae, derived from a statistical analysis of measured data, to relate the laser cladding parameters with the geometric features of the clad track. Given the required clad height and available laser beam power, the proposed method allows one to calculate values of the scanning speed and powder feed rate which are used to obtain low dilution, pore free coatings, fusion bonded to the substrate. To illustrate the application of this method, variable powder feed rate laser cladding experiments were carried out with Stellite 6 powder on mild steel substrates. In this technique the laser beam power and radius and the processing speed are kept constant, while the powder feed rate is varied along a single track length according to a specified linear function. The expressions derived from the model were used to plot the experimental data in a coherent manner, revealing the combined role of the different processing parameters.

Open Access: Yes

DOI: DOI not available