The driver's eye height from the ground, as what drivers can see on the road, is essential for their safety and for avoiding road hazards. Using the statistical analysis of vehicles sample, the statistical parameters of the measured set of values were determined. A one-sample t-test was done to check whether the measured sample differs from the driver's eye height value specified in the Hungarian design guidelines. A new range of driver's eye height has been found, which is considered an update to the current value and might be applied in the upcoming road design. Parallel with the eye-height analysis, sight distances at vertical crest curves were modeled by AutoCAD Civil 3D. The minimum radiuses of the crest curves were defined for human eye height and for sensors of autonomous vehicles.

Nowadays, self-driving cars have a wide reputation among people that is constantly increasing, many manufacturers are developing their own autonomous vehicles. These vehicles are equipped with various sensors that are placed at several points in the car. These sensors provide information to control the vehicle (partially or completely, depending on the automation level). Sight distances on roads are defined according to various traffic situations (stopping, overtaking, crossing, etc.). Safety reasons require these sight distances, which are calculated from human factors (e.g., reaction time), vehicle characteristics (e.g., eye position, brakes), road surface properties, and other factors. Autodesk Civil 3D is a widely used tool in the field of road design, the software however was developed based on the characteristics of the human drivers and conventional vehicles.